Auflistung Nach Schlagwort "Tensile testing"
Anzeige der Dokumente 1-9 von 9
-
Constitutive modeling and finite element methods for TRIP steels
(2006)A constitutive model that describes the mechanical behavior of steels exhibiting "TRansformation Induced Plasticity" (TRIP) during martensitic transformation is presented. Multiphase TRIP steels are considered as composite ... -
Constitutive response and damage in solid propellants
(2005)Solid propellants are composite materials with complex microstructure. In a generic form, the material consists of polymeric binder, ceramic oxidizer, and fuel particles (e.g. aluminum). Damage induced by severe stress and ... -
Corrosion damage evolution of the aircraft aluminum alloy 2024 T3
(2016)Purpose - The purpose of this paper is to quantify the corrosion damage evolution that has occurred on the aircraft aluminum alloy 2024 after the exposure to Exfoliation Corrosion Test (EXCO) solution. Moreover, the effect ... -
Corrosion-induced hydrogen embrittlement in aluminum alloy 2024
(2005)Corrosion is a major concern to the structural integrity of aging aircraft structures. The effect of corrosion on the damage tolerance ability of advanced aluminum alloys calls for consideration of the problems associated ... -
Failure Analysis of Two Ti-Alloy Total Hip Arthroplasty Femoral Stems Fractured In Vivo
(2003)Failure of total hip arthroplasty femoral stems is a serious clinical complication. Even modern metal alloys and designs sometimes suffer such incidents. The reported study aimed at the investigation of the reasons leading ... -
Friction Stir Welding Optimization of 3D-Printed Acrylonitrile Butadiene Styrene in Hybrid Additive Manufacturing
(2022)The feasibility of joining material extrusion (MEX) 3D-printed acrylonitrile butadiene styrene (ABS) plates with the friction stir welding (FSW) process was investigated herein as a promising topic of hybrid additive ... -
Mechanical behavior of aluminum honeycomb sandwich structures under extreme low temperature conditions
(2019)The current study is an effort to characterize the mechanical response of panels that are used as structural elements at low temperature applications. For the above reason, plaques of aluminum honeycomb sandwich were exposed ... -
Probing the Evolution of Retained Austenite in TRIP Steel During Strain-Induced Transformation: A Multitechnique Investigation
(2018)X-ray diffraction analysis, magnetic force microscopy, and the saturation magnetization method have been employed to study the evolution of the percentage and size of retained austenite (RA) particles during strain-induced ... -
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
(2020)This study aims to establish a strategy for bridging the microstructure and mechanical properties of fine-grain-structured dual-phase steel. A complete workflow is built up commencing with the microstructure observations ...